Williams Brothers UAD 200 Series Utility Access Door for Walls & Ceilings

Williams Brothers UAD 200 Series Utility Access Door 
This utility access door is an innovatively designed, cost effective access door for walls and ceilings. Comes standard with a semi-concealed, continuous piano hinge for ease of use. This door offers lateral strength Uniweld Construction with full perimeter welding of door to return frame. The laser cut provides an even gap around all four sides of the door.  The frame (return trim) is 1¾" compared to 1½" on competitor's panels. The corners on the door have round edges (no sharp door corners). These doors are made from 16 gage steel throughout and come ready to paint with a grey baked enamel primer coating. The optional weather resistive neoprene gasketing can be applied to three sides. The flush, stainless steel screwdriver cam latch will resist rust allowing for years of service.

Submittal Sheet	Certificates of Approval	WB Catalog
Cross Reference Chart	Options and Accessories	Warranty

CONSTRUCTION SPECIFICATIONS:

• Door: 16 ga. steel. Trim is 1½" wide
• Frame: 16 ga. steel having a depth of 1¾"
• Hinges: Full length semi-concealed piano hinge. 
• Latches: Flush, stainless steel screwdriver cam latch
• Finish: Grey baked enamel primer coat

OPTIONS:

• Stainless Steel Finish Type 304
• Stainless Steel Finish Type 316 No. 4 Satin Finish Brushed
• WB 151 Key Code Cylinder locks-keyed alike with 2 keys per lock (priced above)
• Mortise Best Lock 
• Weather resistive neoprene gasketing on 3 sides* (priced above)
• Special sizes available

COMPARE MANUFACTURERS:

STANDARD SIZES: